0 грн.
Checkout_1l-1000x1000.jpg "Revitalizant for gearboxes and gearboxes EX120 1 L")
Main specifications
All specifications
Vehicle components:
Transmission box
Product type:
Revitalizant
- Product overview
- Specification
- Application
- Dosage
- Notes
- Reviews (0)
Revitalizant EX120 for gearboxes.
Designed for wear protection and repair of mechanical transmission units. Due to 20% higher* concentration of the active ingredient it has an extended reserve for restoration of worn surfaces and their protection against wear.
*in relation to the product HADO revitalizant gel for gearboxes and gearboxes.
- Eliminates sinks and scratches on work surfaces
- Optimizes contact patches in gear meshes
- Provides significant fuel savings (especially on all-wheel drive vehicles)
- Reduces noise and vibrations of components by 10 times
- Improves gear shifting clarity
- Improves the clarity of operation of synchronizers
- In case of emergency oil leakage, it allows safe operation of transmission units for a long period of time (up to 1000 km)
During machining of mechanical transmission units, it forms a ceramic-metal coating on the surfaces of its gears, shafts, bearings, synchronizers and other metal parts. As a result, the geometry of parts is restored. Revitalizant is universal for mechanical, robotic, sequential, including Direct Shift gearboxes, transfer cases, axles (differentials).
Specifications
Basic
Vehicle components
Transmission box
Product type
Revitalizant
Application
- Apply the required amount of product into the oil filler (oil gauge) opening of the gearbox, transfer case or axle gearbox, warmed up to operating temperature
- Operate the vehicle as normal. The treatment is considered to be finished after 50 hours of machine operation or 1500 km of travel
Not recommended for use in automatic transmissions, robotic transmissions with two "wet" clutches.
Revitalization is considered complete after 50 hours of operation (1500 km of travel).
Dosage
Oil system volume, l 1-2 2-5 5-8 Number of syringes (8 ml), pcs. 1 2 3 Processing scheme by stages Once Once Once
Notes
A characteristic sign of the beginning of revitalization is the reduction of noise in the mechanism already from the first kilometers after treatment.
If the improvement of the mechanism stops at some point, it may indicate its severe wear and tear - it is necessary to double the recommended dosage. If, after 100-200 km, the mechanism improves, the most probable cause is faulty diagnosis.
Revitalizant is compatible with all types of oils for mechanical transmissions. It does not react chemically with them and does not change their viscosity and other physical and chemical properties.
Protective metal-ceramic coating is formed on any operable mechanism, however, if the unit is in critical condition (100% wear), it is necessary to replace the destroyed parts.
Reviews (0)
There are no reviews for this product.
No questions about this product, be the first and ask your question.