0 грн.

Checkout

Revitalizant for diesel engines XADO EX120 1 L

Reviews:
(0)
  • Product Code: XA 10134
  • Availability: In Stock
  • Series: EX120 Series: https://xadoindustrial.com/en/ex120-en/
27 248 грн.
Contact the manager
Enter the phone number and we will call you back
Main specifications
All specifications
Vehicle components: Engine
Engine type: Diesel
Product type: Revitalizant
This product has a minimum quantity of 4
  • Product overview
  • Specification
  • Application
  • Dosage
  • Notes
  • Reviews (0)
  • Questions (0)
Revitalizant EX120 for diesel engines.

Designed for wear protection and repair of diesel engines, including boosted and turbocharged engines. Thanks to 20% higher* concentration of the active ingredient, it has an extended reserve for the restoration of worn surfaces and their protection against wear.
*in relation to the product HADO gel revitalizer for diesel engines.

  • Restores and protects from wear the rubbing parts of the cylinder-piston group, crank and connecting rod and timing mechanisms
  • Significantly reduces fuel consumption (up to 30% at idle)
  • Increases system oil pressure to rated pressure
  • Equalizes and increases compression in cylinders
  • Increases engine power and improves its efficiency
  • Reduces noise and vibration by a factor of 10
  • Increases the service life of assemblies by 2-3 times
  • Protects the engine from the negative effects of a cold start
  • Improves engine performance after 50-100 km
  • Allows engine operation in case of emergency oil leakage up to 300 km

Forms a ceramic-metal coating on the surfaces of friction pairs (engine parts restore their geometry). As a result, the renewed unit exceeds the new one in its performance characteristics and is guaranteed to last 2-4 times longer.

Specifications
Basic
Vehicle components Engine
Engine type Diesel
Product type Revitalizant
Application

The engine treatment is carried out in three stages:

Stage 1: pour the contents of the syringe into the oil filler neck of the engine warmed up to operating temperature. Start the engine and let it idle for 5-10 minutes.

2nd stage: carried out in the same order after 100-250 km of mileage.

Stage 3: carried out in the same order after 100-250 km of mileage.

The treatment is considered to be completed after at least 1500 km of driving.

Dosage
Oil system volume, l. 3-10 11-20 21-30
Number of syringes (8 ml), pcs. 3 6 9
Processing scheme by stages 1+1+1 2+2+2 3+3+3
Number of syringes for new engines 2 4 6

 

Notes
  • It is not recommended to change the oil before completion
  • Possible idling treatment (4 hours - equivalent to 200 km of driving)
  • New engines with mileage up to 20,000 km to be processed in one go
  • It is recommended that engines after overhaul be treated as usual in three stages
  • Protective metal-ceramic coating is formed on any operable mechanism, however, if the mechanism (motor) is in critical condition (100% wear), it is necessary to replace the destroyed parts

After treatment your car is under the super protection of HADO. In the process of engine operation, the most exposed to wear are the cylinder piston group in the area of the top "dead" point, parts of the timing mechanism (cam, tappet), sliding bearings of the crankshaft and camshaft.

The revitalizant contains a building material that compensates for the wear of these parts. As a result of revitalization, a new multifunctional gradient coating with a set of required service characteristics and stress states is formed on the surfaces of friction pairs. Engine parts increase in volume, return the very "hundreds" and "tens" that were lost, worn out in the process of operation. This is the effect of repair.

The resulting coating has unique properties: significant strength, high corrosion resistance, low roughness. After revitalization, engine parts are guaranteed to last 2-4 times longer. As a result of revitalization of the engine significantly increases and equalizes the compression in the cylinders, reduces fuel consumption, increases the efficiency and roll of the car, restores oil pumps, turbocharger units, shafts and liners (bearings), cylinder mirrors, eliminates ellipticity.

The engine runs quietly and vibration-free. Thanks to revitalization, it can always be kept in perfect condition.

Reviews (0)

There are no reviews for this product.

Questions (0)

No questions about this product, be the first and ask your question.