0 грн.

Checkout

XADO Atomic Oil 5W-30 SP RED BOOST synthetic motor oil 60 l

Reviews:
(0)
  • Product Code: XA 26685
  • Availability: In Stock
  • Series: XADO Series: https://xadoindustrial.com/en/xado-en/
17 599 грн.
Contact the manager
Enter the phone number and we will call you back
Main specifications
All specifications
Viscosity of SAE: 5W-30
Density at 20 °C, kg/l: 0,846
Viscosity at 100 °C, mm²/s: 10,8
Viscosity at 40 °C, mm²/s: 61,1
  • Product overview
  • Specification
  • Reviews (0)
  • Questions (0)

Modern energy and resource-saving engine oil with a long service life.
Contains REVITALIZANT® RF[10.5]* and the innovative RED BOOST additive.
XADO Atomic Oil 5W-30 SP RED BOOST is a high-quality engine oil specially formulated for gasoline
engines of American and Japanese passenger cars, SUVs, vans, providing for
the use of low-viscosity oils with higher performance properties that meet the requirements for
performance (API SR) and resource and energy conservation (ILSAC GF-6). Meets the most stringent
2010 US standards for engine wear protection.
The oil can be used in gasoline engines running on natural gas (LPG and CNG) and biofuels containing up to 85% ethanol (LPG and CNG).
containing up to 85% ethanol (E85). Suitable for Toyota, Honda and Lexus hybrid vehicles and can be used
where GM dexos1™, GM 6094M or Chrysler MS 6395 are prescribed.


BENEFITS

  • high level of fuel efficiency;
  • protection against high temperature deposits on the piston and turbocharger;
  • mitigation of the effects of low-speed spontaneous combustion of the fuel-air mixture (Low Speed Pre Ignition or LSPI) in modern GDI and TGDI engines throughout the entire oil change interval;
  • maximum protection against wear of the timing chain;
  • resistant to oxidation, reduces the formation of sludge and varnish;
  • engine protection against current wear due to the REVITALIZANT® component;
  • RED BOOST additive stabilizes the alkaline number at high thermal loads on the engine.

XADO Atomic Oil 5W-30 SP RED BOOST fulfills the requirements:

  • API SP/SP-RC/SN-RC
  • ILSAC GF-6A
  • ILSAC GF-5
  • GM dexos 1 Gen 2
  • Ford WSS-M2C946-A
  • Chrysler MS 6395
  • GM 6049-M
  • Honda HTO-06
Specifications
Basic
Viscosity of SAE 5W-30
Technical information
Density at 20 °C, kg/l 0,846
Viscosity at 100 °C, mm²/s 10,8
Viscosity at 40 °C, mm²/s 61,1
Viscosity index 169
Flash point, °C 200
Solidification temperature, °C -42
Reviews (0)

There are no reviews for this product.

Questions (0)

No questions about this product, be the first and ask your question.