0 грн.
Checkout
- Product Code: XB 20250_3
- Availability: In Stock
- Series:
VERYLUBE
289 грн.
- 2 L 289 грн.
- 20 L 2 699 грн.
- 60 L 8 299 грн.
- 200 L 26 499 грн.
Main specifications
All specifications
Oil base type:
Mineral
Vehicle components:
Engine; Gearbox
Product type:
Flushing oil
Density at 20 °C, kg/l:
0,885
This product has a minimum quantity of 6
- Product overview
- Specification
- Application
- Notes
- Reviews (0)
Mineral low-viscosity oil with additive complex for engine and transmission flushing. Contains revitalizant.
VERYLUBE flushing oil is designed for cleaning of oil systems of engines and transmission units of cars. Special detergent-dispersing, anti-wear and anti-seize additives allow to wash the oil system absolutely safely (in 30-40 minutes) and effectively clean it from all kinds of contaminants (up to the level of technical purity).
- Absolutely safe flushing of the oil system to technical purity (VitaFlush technology)
- Wear protection reserve (XADO technology)
- Restoration of oil and compression ring mobility
- Possibility of enhanced washing of heavily contaminated units (up to 30-40 min) due to the action of anti-wear additives package
- Eliminates the "sticking" effect of hydrocompensators
XADO revitalizant provides a reserve of wear protection during flushing.
Specifications
Basic
Oil base type
Mineral
Vehicle components
Engine; Gearbox
Product type
Flushing oil
Technical information
Density at 20 °C, kg/l
0,885
Viscosity at 40 °C, mm²/s
30,0
Viscosity index
>100
Flash point, °C
+210
Solidification temperature, °C
−15
Alkaline number, mgKOH/g
30,0
Others
Engine type
Petrol; Diesel; LPG
Application
For the engine:
- Drain warm used oil
- Fill with VERYLUBE flushing oil to the minimum dipstick mark
- Start the engine, idle it for 10-15 minutes (up to 30-40 minutes if the engine is heavily contaminated).
- Shut down engine, drain flushing oil, replace oil filter
- Fill XADO Atomic Oil engine oil
For transmission units:
- Drain warm used oil
- Pour VERYLUBE flushing oil into the transmission unit up to the nominal level
- Ensure that the machine runs without load (with wheels out) for 10-15 minutes (up to 30-40 minutes - in case of heavy contamination).
- Turn off the engine, drain the flushing oil
- Fill in XADO Atomic Oil transmission oil
Notes
Unlike conventional ones, VERYLUBE flushing oil contains a complex of special additives (detergent-dispersing, anti-wear and anti-seize), which allows to clean the engine oil system to the level of technical cleanliness in an absolutely safe way.
- The special low-viscosity base of the flushing oil ensures its easy circulation through the oil system and fast dissolution of dirt clots
- Highly effective cleaning additives gently clean engine internals from sludge and high-temperature deposits and caked oil
- Anti-wear and anti-seize additives ensure safe cleaning of the lubrication system even during prolonged flushing (up to 30-40 min)
Attention! Do not drive on flushing oil!
Reviews (0)
There are no reviews for this product.
No questions about this product, be the first and ask your question.