0 грн.
Checkout
Main specifications
All specifications
Vehicle components:
Tires
Product type:
Sealant
This product has a minimum quantity of 15
- Product overview
- Specification
- Application
- Notes
- Reviews (0)
Effective product for temporary repair of car tires.
Designed to eliminate leaks in chamber and tubeless tires on cast and stamped wheels. It is used for passenger cars and small trucks.
- Repairs in one minute
- Securely seals the leakage point
- Does not affect wheel balance
- Does not freeze in winter
Specifications
Basic
Vehicle components
Tires
Product type
Sealant
Application
- Remove the object that punctured the tire
- Lower the tire until the rim touches the ground by turning the tire so that the puncture point is at the bottom of the tire
- The temperature of the sealant should not be lower than +15 °C. Do not heat the cylinder with an open flame
- Shake the can vigorously
- Screw the plastic tube fitting tightly onto the wheel valve
- Hold the cylinder with the valve down
- Remove the safety cap, depress the valve and hold it in place until the compound stops flowing out of the cylinder
- Immediately drive 1-2 km at a speed of no more than 20 km/h
- Then have the wheel repaired at the nearest service station at a speed not exceeding 60 km/h
Notes
Attention! Compound is not recommended for repairing tires with small internal volume (mopeds, bicycles, etc.).
The product does not eliminate air leaks through the valve and through the seating surface of the tire (on the rim of the rim).
Reviews (0)
There are no reviews for this product.
No questions about this product, be the first and ask your question.