0 грн.
Checkout
Main specifications
All specifications
Vehicle components:
Engine
Engine type:
Diesel; Petrol
Product type:
Cleaner
This product has a minimum quantity of 20
- Product overview
- Specification
- Application
- Dosage
- Notes
- Reviews (0)
Piston ring descaling agent.
Fast-acting agent for de-cracking of dead piston rings of gasoline and diesel engines. Removes all soot and tar contaminants from piston cylinder cavities. After application it does not require replacement of engine oil.
- Restores ring mobility
- Reduces oil consumption
- Cleans cylinders and pistons, combustion chambers, valves from all kinds of contaminants (soot, coke, varnish, resins)
- Equalizes compression across cylinders
- Reduces engine running noise
- Removes deposits from spark plugs (glow plugs)
- Reduces harmful exhaust emissions into the atmosphere
Specifications
Basic
Vehicle components
Engine
Engine type
Diesel; Petrol
Product type
Cleaner
Application
- Warm up the engine. The engine should be warm, but not hot.
- Unscrew the plugs (injectors). Disconnect the ignition distributor sensor connector, Hall sensor or switch.
- Tube: Apply the contents of 1 tube into the cylinder. Screw the plug back in. Repeat the operation for the remaining cylinders. Wait at least 20 minutes. Unscrew the plugs. Cover the plug holes with an absorbent cloth to prevent flying dirt from getting on the paint. Crank the engine with the starter for a few seconds.
- Aerosol can: Using the nozzle hose, spray (up to 5 seconds) the product (add the contents of 1 tube) alternately into each cylinder. Screw the plugs back in. Wait 10 - 20 min. Unscrew the plugs. Cover the plug holes with an absorbent cloth to prevent flying dirt from getting on the paint. Crank the engine with the starter for a few seconds.
- Replace the plugs (injectors).
- Start the engine and allow it to run at increased crankshaft speed for up to 15 min. During this time the residual softened coke will be removed through the exhaust system.
Dosage
1 tube - 1 cylinder.
Notes
- Avoid contact of the composition with paint coatings
- Safe for catalytic converters, oxygen sensors, rubber products and seals
VERYLUBE Anticox in tube can be used to flush the engine oil system:
- Apply the product into the oil filler neck of the warmed engine at the rate of 10-40 ml of the composition per 3-5 liters of oil, depending on the intensity of deposits in the oil system.
- Allow the engine to idle for 10-15 minutes
- Change oil and oil filter
Reviews (0)
There are no reviews for this product.
No questions about this product, be the first and ask your question.